News

Industry benchmark for panel sizing saw blades

Neu, leise und leistungsfähiger: [1] +[4] Neue Hartmetallsorte "HL Board 03 plus" für die Zähne und neues Schleifverfahren für lange Standwege [2] + [3] Laserornamente und Dehnungsschlitze für Laufruhe
UniCut plus: new, noise reduced and more efficient
[1] + [4] new carbide grade"HL Board 03 plus" new and grinding technology for long edge lives
[2] + [3] laser ornaments and expansion slots for smooth running

Durch die Verbesserungen an den Plattenaufteil-Stammblättern reduziert sich der Lärm im Schnitt und im Leerlauf um rund 4 dB(A).
Thanks to the improvements made on the panel sizing saw blade bodies, noise is reduced by approx. 4 dB(A) when cutting and idling.

 

SpeedCutplus
The powerful saw blade for stack cuts with high running meter performance is available from stock in diameters from 480-730 mm. The maximal cutting height is 215 mm.

 UniCut plus Einsatzschema
The multi-functional saw blade for pressure beam machines is available from stock in diameters from 350-450 mm. Excellent cutting results can be obtained in single sheets and stacks up to 80 mm.

UniCut g5-System Einsatzschema
For excellent cutting results in plywood boards, wood core plywood, veneered or paper-laminated panels and - due to the very low cutting pressure - also in honeycomb panels. The small kerf of 4.0 mm reduces the power consumption of the machine. The UniCut g5 is available from stock with diameters from 350 - 450 mm. Matching the main saw blades, the scoring saw blade program with the tooth form "conical ATB" was enlarged by the cutting width 4.0 - 4.8 mm.

 

LEUCO g5-System Zahngeometrie

LEUCO g5-System Logo

 The "LEUCO g5-System" includes all saw blades with the unique g5 tooth group cutting geometry.

 
 

 

 

Low-noise, powerful members of the UniCut and SpeedCut family

LEUCO recently switched the whole topline Sizing Saw Blade Program to a LEUCO low-noise design with the result that the usual excellent cutting quality can even be surpassed and at the same time noise can be reduced by approx. 4 dB(A) when cutting and idling.

 

LowNoise panel sizing saw blades set new standards

This success story is continued now with panel sizing saw blades. When configuring the tool body the focus lies on the reduction of vibrations. A saw blade is noise-reduced if a quick dampening and thus calming of the saw blade in the case of external stimulation is reached. In practical tests you knock against the saw blade and if you hear only a thud, the saw blade is vibration-reduced and running smoothly when cutting and idling. This result is reached by laser ornaments, additional expansion slots and tensioning rings. Geometry, number and position of the expansion slots and laser ornaments are defined by means of the most modern calculation methods - this is the key to success. This guarantees not only a reduction of vibration but also a noise reduction.

 

In the case of panel sizing saw blades, performance is essential.

This is why LEUCO enhanced panel sizing saw blades also with regard to running meter performance and cutting quality. Tooth geometry was enhanced to maintain the optimal combination between cutting quality and performance for cuts in single sheets and stacks.

To improve considerably the running meter performance, LEUCO uses the new cutting material „LEUCO Board 03 plus“ with the following advantages:

  • increase of edge lives of approx. 30%
  • no tooth breaking in spite of extremely wear resistant tungsten carbide.

Edge life not only depends on the applied new cutting material but also on grinding competence. LEUCO reduces surface roughness when the saw blade teeth are ground and thus increases considerably the edge life.

 

icon-toggle-viewTechnical improvements

  • Thanks to the improvement on the panel sizing saw blade bodies, thanks to the new expansion slots and laser ornaments the noise during cutting and when idling is reduced by perceptible 4 dB(A).

  • SpeedCut plus and UniCut plus = less noise and higher performance compared to the previous "Speed Cut" and "UniCut":
    • New cutting material grade HL Boad 03 plus,
    • New grinding technology
    • New laser ornaments and expansion slots
  • UniCut g5-System = less noise and higher performance compared to UniCut, especially in the case of wood-based panels, veneered or paper-laminated panels and honeycomb panels.
    • New cutting geometry „g5-System“
    • New laser ornaments and expansion slots

 

icon-toggle-viewFurther information

 

 

News Overview

To the archive