187799 - UniTec Hoggers CM DP for LEUCO s-System Ø 192 mm (RZ/DZ)
Technical data
Description
Machine / Application
- double end tenoners
- for chip-free sizing of raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- Resharpening area: 5 mm
- n max=6,000 min-1
- division of cut in pre-cut and re-cut tooth
- constant cutting width
Advantages
- improved chip evacuation integrated into the tool (ChipMeister)
- reduced cleaning efforts
- reduced suction performance
- high quality of cut due to division of cut
- long edge lives thanks to optimized tooth form
Notes
- especially for particle boards with loose core, recycling particle boards, particle boards with sensitive coating
- machining of 8 mm boards is also possible
- for scoring/hogging (RZ) and double hogging (DZ) process
- application with feed
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 250 [mm] | |
B = Cutting width | 8,0 [mm] | |
b = Hub width | 23 [mm] | |
Ø d = Bore diameter | 80 [mm] | |
Z = No. of teeth | 24+12 | |
Feed DZ = Recommended feed DZ | 30 [m/min] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |