179020 - Panel Raising Cutters DP HSK 25R Postforming for inlay profiles - Homag
Technical data
Description
Machine / Application
- postforming machines Homag
- for panel raising of melamine-, paper-, HPL-laminated and veneered panels during the direct postforming process
Design
- resharpenable area 3.5 mm
- inside edge Z = 9 resp. Z = 12
- shear angle and extreme division of cutting pressure
- n max = 24,000 min-1
Advantages
- optimum cutting quality thanks to high concenctric accuracy and precise tool balancing
- no need for extra scoring station
Notes
- with inlay profiles
- application with feed
- * tracing with copy wheel
- sense of rotation see drawing
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 70 [mm] | |
B = Cutting width | 25 [mm] | |
b = Hub width | 28 [mm] | |
Ø d = Bore diameter | HSK 25R [mm] | |
Z = No. of teeth | 9+3+3 | |
nmax = maximum RPM | 24,000 [min-1] | |
Recommended feed = Recommended feed | 25 [m/min] | |
L/R = cutting direction | L | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |