PSE3 - p-System Profile Cutters HW
Technical data
Description
Machine / Application
- machine
- EWD FR15, FR16
- Linck VPF340
- for milling of corners / profiling
Design
- one part and segmented
- turnover knives can be used on all four sides
- extremely scoring cut
- cutting material: HW HL Solid 20
Advantages
- no chippings due to knots
- considerable improvement of surface quality compared to the existing chipping knives
- small chips suitable for pellet production
- extremely long edge lives (up to 8 million running meters)
Notes
- chips are not suitable for paper industry
- feed rate per tooth fz = 2-8 mm
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 360 [mm] | |
B = Cutting width | 64 [mm] | |
b = Hub width | 164 [mm] | |
Ø d = Bore diameter | 60 [mm] | |
Z = No. of teeth | 4+4 | |
Shear∡ = Shear angle | 70 [°] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Machine/Type | EWD | |
Remarks | horizontal axis right | |
Dimensions entered are not listed?
available from stock |
Turnover Knives
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Turnover Knives HW with 4 cutting edges and countersink - EWD, Linck | 21x21x5.5N | 186110 | |||
available from stock |
Spare parts / accessories
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Drilling fixture | 186441 | ||||
Drilling fixture | 186443 | ||||
Head Cap Screws | M14x60-12.9 DIN EN ISO 4762 | 185008 | |||
Head Cap Screws | M14x80-12.9 DIN EN ISO 4762 | 185181 | |||
Conical Screws | M6x10 D7.8x20GRD 10.9 | 184891 | |||
Countersunk Screws | M7x17 T30 10.9 | 185643 | |||
Repair set | M7 | 185881 | |||
Helicoil® | M7x10,5 | 50930340 | |||
available from stock |