p-System Jointing Cutters CM DP - MAN
Article
Description
Machine / Application
- table shaper
- for chip-free high-performance jointing of solid woods (free of knots) along and accross the grain
- for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- symmetrical design
- non-convex design
- extremely scoring cut
- resharpening area 1.5 mm
Advantages
- maximum cutting quality and edge lives
- large depth of cut possible
Notes
- application against feed
- recommended feed rate per tooth: wood-based panels 0.8 mm, solid wood 0.4 mm
- crowned design on request
- sense of rotation according to VDMA 8849
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Shear∡
[°] |
nmin-nmax
[min-1] |
Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||
125 | 28,2 | 35.2 | 30 | 2+2 | 70 | 6100-10500 | symmetrical | 184332 | ||
125 | 47,8 | 54.8 | 30 | 2+2 | 70 | 6100-10500 | symmetrical | 184333 | ||
125 | 28,2 | 35.2 | 30 | 3+3 | 70 | 6100-10500 | symmetrical | 184329 | ||
125 | 47,8 | 54.8 | 30 | 3+3 | 70 | 6100-10500 | symmetrical | 184330 |