Directly to the tool

Tool finder

Workpiece material

Machine

Applications

Features

Radius

Chamfer angle

Cutting circle diameter

Cutting width

Bore diameter

No. of teeth

Finger joint length

Cutting material group

LEUCO product names

To the product names

Articles found: 12

Your can restrict your selection by using the other filters!

Reset

Selection via tool type

Finger Joint Cutters 10/11 - real Z=6

Product

Drawing

  • High Speed Steel [HS]
  • MEC

Article

Description

Machine / Application

  • finger joint machines
  • machines with cross-cutting device
  • For longitudinal joints in soft, hard and exotic woods, with a finger length of 10 mm

Design

  • Real Z=4 or Z=6 for high feed rates
  • Finger length of 10 mm
  • HS suitable for soft woods
  • HS Solid 34 suitable for knotty soft woods

Advantages

  • HS Solid 34: high bending strength, compared to HS finger joint cutters the edge life is 1.5 - 2 times as long
  • topcoat 104: the edge life is 2 times as long compared to HS finger joint cutters

Notes

  • no. of cutters: see table

Table- and picture caption ...

Ø D
[mm] 		B
[mm] 		b
[mm] 		Ø d
[mm] 		Z Partition
[mm] 		Finger joint length
[mm] 		Number of finger joints
[pc.] 		nmax
[min-1] 		Remarks Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

250 26,4 15.4 50 6 3.8 10/11 3 6,000 top finish cutter, HS 187424 
|
250 41 19 50 6 3.8 10/11 5 6,000 base cutter, HS 187411 
|
250 26,4 15.4 50 6 3.8 10/11 3 6,000 bottom finish cutter, HS 187416 
|
250 26,4 15.4 50 6 3.8 10/11 3 6,000 top finish cutter, HS, topcoat 104 187423 
|
250 41 19 50 6 3.8 10/11 5 6,000 base cutter, HS, topcoat 104 187412 
|
250 26,4 15.4 50 6 3.8 10/11 3 6,000 bottom finish cutter, HS, topcoat 104 187418 
|
250 26,4 14.8 50 6 3.8 10/11 3 6,000 top finish cutter, HS Solid 34 187425 
|
250 41 19 50 6 3.8 10/11 5 6,000 base cutter, HS Solid 34 187413 
|
250 26,4 14.8 50 6 3.8 10/11 3 6,000 bottom finish cutter, HS Solid 34 187417 
|
250 26,4 14.8 50 6 3.8 10/11 3 6,000 top finish cutter, HS Solid 34, topcoat 104 187426 
|
250 41 19 50 6 3.8 10/11 5 6,000 base cutter, HS Solid 34, topcoat 104 187414 
|
250 26,4 14.8 50 6 3.8 10/11 3 6,000 bottom finish cutter, HS Solid 34, topcoat 104 187420 
|