80476491 - DIAMAX Edge Multiprofile Cutter CM DP HSK 25R - Homag (Brandt) MS 40
Technical data
Description
Machine / Application
- Homag (Brandt) edge banding machine with dual-profile technology and MS 40 aggregate
- For rounding of soft-wood, hard-wood, veneer and plastic edge bands
Design
- with shear angle
- polished face
- High-finish clearance angle
- n max=24,000 min-1
Advantages
- Very long edge life compared to the HW cutterhead version
- Optimized chip removal thanks to ChipMeister version
- No contamination of the machine with chips
- No malfunctions due to chips
- Reduction of the extraction output
- Low noise level
Notes
- Sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
R1 = Radius 1 | 1.5 [mm] | |
R2 = Radius 2 | 2 [mm] | |
Ø D = Cutting circle diameter | 74.67 [mm] | |
Ø D1 = Basis cutting circle diameter | 68,08 [mm] | |
a = Distance to machine | 21.72 [mm] | |
B = Cutting width | 14 [mm] | |
L1 = Total length | 25.28 [mm] | |
Ø d = Bore diameter | HSK 25R [mm] | |
Z = No. of teeth | 4 | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |