Trimming Saw Blades HW - with chip limiter "WS" - topline
Article
Description
Machine / Application
- Table saws
- Suitable for manual feed
- for sizing cuts in solid woods
- especially for knotty woods
Design
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 20
Advantages
- no chipped edges from knots thanks to chip limiter
- noise-reduction thanks to laser ornaments
Notes
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Corner∡
[°] |
Tooth geometry | LEUCODUR | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
300 | 3,2 | 2.2 | 30 | 28 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 20 | 10 | WS | HL Board 20 | 193240 | ||
350 | 3,5 | 2.5 | 30 | 32 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 20 | 10 | WS | HL Board 20 | 193241 | ||
400 | 4,0 | 2.8 | 30 | 36 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 20 | 10 | WS | HL Board 20 | 193242 | ||
450 | 4,4 | 3 | 30 | 40 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 20 | 10 | WS | HL Board 20 | 193243 | ||
500 | 4,4 | 3.2 | 30 | 44 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 20 | 10 | WS | HL Board 20 | 193244 |