189988 - Sizing Saw Blades HW "TR-F" - hook angle 5°
Technical data
Description
Machine / Application
- table saws
- vertical panel sizing saws
- for sizing cuts in plastic-laminated panels
Design
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- improved bottom edge (without scoring sawblade) thanks to 5 degree hook angle
- noise-reduction thanks to laser ornaments
Notes
- larger bore (max. Ø 50 mm) available for a surcharge
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 250 [mm] | |
B = Cutting width | 3,2 [mm] | |
b = Body thickness | 2.2 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 80 | |
NL = Pin holes | 2/7/42 + 2/9,5/46,5 + 2/10/60 | |
Hook angle = Hook angle | 5 [°] | |
Tooth geometry = Tooth configuration | TR-F | |
LEUCODUR = Cutting material | HL Board 06 | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |