192813 - Panel Sizing Saw Blades HW - Q-Cut "G5"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- horizontal panel sizing saws
- for sizing and finish cuts in wood core plywood, plywood boards, veneered or paper-laminated wood-based panels and honeycomb panels
Design
- vibration and noise damping ornaments
- additional expansion slots
- tooth configuration: G5
- cutting material: HW HL Board 04 plus
Advantages
- very low cutting pressure and small power consumption thanks to optimized cutting geometry
- excellent cutting quality in wood-based materials containing fibers
- extremely low-noise and smooth running thanks to vibration and noise damping ornaments as well as special expansion slot combinations
Notes
- Attention: when assigning the appropriate scoring saw blades, please take into account the cutting width reduction of 4 mm!
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9.5/46.5 + 2/7/42
- NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8.4/130 + 2/14/110 + 4/9/100 + 4/19/120
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 350 [mm] | |
| B = Cutting width | 4,0 [mm] | |
| b = Body thickness | 3.2 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 80 | |
| NL = Pin holes | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 + 2/13/94 | |
| Hook angle = Hook angle | 15 [°] | |
| Shear∡ = Shear angle | 8 [°] | |
| Tooth geometry = Tooth configuration | G5 | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
| Machine/Type | SCM, Panhans, Mayer, Schelling, HOLZ-HER | |
|
Dimensions entered are not listed?
available from stock |
||
