189889 - NF-Panel Sizing Saw Blades HW - positive hook angle "TR-F"
Technical data
Description
Machine / Application
- horizontal panel sizing saws
- for dividing cuts in aluminum block materials
Design
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 09
Advantages
- noise-reduction thanks to laser ornaments
Notes
- for stack heights up to 200 mm (for large saw diameters)
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 680 [mm] | |
B = Cutting width | 5,8 [mm] | |
b = Body thickness | 4.5 [mm] | |
Ø d = Bore diameter | 40 [mm] | |
Z = No. of teeth | 60 | |
NL = Pin holes | 2/13/114 | |
Hook angle = Hook angle | 15 [°] | |
Tooth geometry = Tooth configuration | TR-F | |
LEUCODUR = Cutting material | HL Board 08 | |
L = Delivery Status | ||
Machine/Type | Schelling | |
Dimensions entered are not listed?
available from stock |