189074 - NF-Chop Saw Blades HW - neutral hook angle "TR-F"
Technical data
Description
Machine / Application
- chop and miter saws
- table saws
- for clipping and mitre cuts in aluminum profiles
Design
- neutral hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- burr-free cuts in profiles with low roughness
- noise-reduction thanks to laser ornaments
Notes
- tight workpiece clamping required
- Kaltenbach as counter-bore type
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 420 [mm] | |
B = Cutting width | 3,8 [mm] | |
b = Body thickness | 3.2 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 102 | |
NL = Pin holes | 2/10/70 | |
Hook angle = Hook angle | 0 [°] | |
Tooth geometry = Tooth configuration | TR-F | |
LEUCODUR = Cutting material | HL Board 06 | |
L = Delivery Status | ||
Machine/Type | Rapid, Elumatec | |
Dimensions entered are not listed?
available from stock |