193114 - NF-Chop Saw Blades HW - positive hook angle "TR-F" topline
Technical data
Description
Machine / Application
- table saws
- for dividing and miter cuts in aluminum and plastic profiles as well as for wood-based panels (Corian®, Noblan, Varicor® and HPL)
Design
- positive hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- noise-reduction thanks to laser ornaments
Notes
- tight workpiece clamping required
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 350 [mm] | |
B = Cutting width | 3,2 [mm] | |
b = Body thickness | 2.5 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 108 | |
NL = Pin holes | 2/7/42 + 2/9/46 + 2/10/60 | |
Hook angle = Hook angle | 5 [°] | |
Tooth geometry = Tooth configuration | TR-F | |
LEUCODUR = Cutting material | HL Board 06 | |
L = Delivery Status | ||
Machine/Type | Haffner, Rapid, Pfeffer | |
Dimensions entered are not listed?
available from stock |