80143865 - Pre-Cut Gang-Rip Saw Blades HW with HW-rakers "F" - EWD
Technical data
Description
Machine / Application
- primary machines with and without chippers
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
- type A and C with staggered double keyways
Advantages
- extremely high bending strength and hardness of the teeth
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- the saw blade is optimized according to the LEUCO company standards as well as according to the customers specifications and machine parameters after consultation with the technical engineering
- Ident-No. is only for orientation
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 630 [mm] | |
B = Cutting width | 5,4 [mm] | |
b = Body thickness | 3.8 [mm] | |
b1 = Hub width 1 | 7 [mm] | |
Ø D1 = Hub diameter | 200 [mm] | |
Ø d = Bore diameter | 150 [mm] | |
Z = No. of teeth | 24 | |
Number of rakers = Number of rakers | 6 [pc.] | |
DKN = Double keyway | 37x4 [mm] | |
NL = Pin holes | 8/8,5/175 + 2/10,2/175 | |
Hook angle = Hook angle | 25 [°] | |
L/R = cutting direction | L | |
LEUCODUR = Cutting material | HL Board 20 | |
L = Delivery Status | ||
Machine/Type | EWD FR 16 | |
Dimensions entered are not listed?
available from stock |